Products Information

HOME > English Home > Products Information > Notable Products

Aqua-La-Vie

A completely novel design with greater use of curved surfaces that depart from conventional designs. This trap offers a “design revolution” for washstands, suitable even for washstands with the trap part exposed such as public and cabinet-less washstands. The trap function is equipped inside the compact body. Washstand interiors even with a cabinet can be used spaciously.

Stainless-Steel Trap Set

The trap has a metallic quality appearance with the inner surface of the drainer body covered with stainless steel. Measures are taken against condensation on the underside of the drain outlet by covering the outer surface of the metal layer with a resin layer. Since the inner surface of the drainer body is constructed from stainless steel, there is no slime due to kitchen waste as in the case of a resin drainer.

CURRULLAQ

The drain elbow is of a thinner type than conventional ones. The degree of freedom in connection is increased. Since there are three-way wire plug-in openings, the piping direction is also selected with complete control. The wire edge is designed to pop up during installation by making the gear component on the switch side a screw snap-fastened type. In addition, the wire edge can be connected to the wire support through one-touch operation.

Free Pipe 100

Makes easy connection by correcting the center displacement in the hard piping between the kitchen trap and the startup pipe within a displacement range of 0 - 100 mm. The conventional accordion hose connection is changed to hard piping. With regard to maintenance measures for drain pipes as relates to the Housing Quality Assurance Law, this product corresponds to level 3.

Washstand Free Drain Hose

Makes easy connection by correcting the center displacement in the hard piping between the drain outlet of the washstand and the startup pipe within a displacement range of 0 - 55 mm. The nut configuration has been changed from the conventional octagon shape to a circular design to improve the elaborate design. With regard to maintenance measures for drain pipes according to the Housing Quality Assurance Law, this product corresponds to level 3.

DP Trap

For piping of a disposer (DP), the use of an accordion hose is strictly prohibited since dirt accumulates in the folds. Maruichi has prepared a hard resin trap in large diameter. Since the product is hard with a flat and smooth inner face, connecting it to the DP does not allow for inside dirt accumulation. (Product compatible with the Housing Quality Assurance Law) Two types of S and P have been prepared. Select the type convenient according to your piping conditions.